At H.I. Fraser we are proud of our extensive testing and certification capabilities. Our breadth of offering is only matched by our drive to ensure all equipment is operating at an optimal level.

Our Repair and Overhaul section includes clean room facilities (in both Sydney and Perth) to AS/NZ ISO 14644.1 Class 7 for servicing oxygen, life support and other critical gas system equipment.

For testing and development we have pneumatic test facilities to 60MPa and hydrostatic facilities to 230MPa. In addition to our critical gas capabilities we test non-critical applications, for example oil and hydraulics.

We also have six portable tests rigs for various air and liquid applications. The test rigs are available for hire to enable your maintenance crews to carry out the testing and certification in accordance with your schedule or shut down requirements.

See below for our testing and certification capabilities and equipment in your state:

Sydney:

  • Gauges and calipers for most common threads
  • NATA traceable digital pressure transducers to perform periodic calibration process
  • Telescopic gauges
  • Optical comparator
  • Digital vernieres and micrometers
  • Bore gauges
  • Depth micrometers
  • Slip gauges
  • Dial indicators
  • Special gauges
  • IRHD micro hardness testing for strings and rubber components
  • Hydrostatic testing
  • Breathing air analysis
  • Vibration analysis
  • Thermography
  • Shock testing
  • Proof / failure testing
  • Non-Volatile Residue (NVR) testing
  • Pressure Vessel inspection / testing
  • 3 purpose built dirty test rigs for testing of industrial / working air, hydraulic oil and water applications
  • 3 purpose built critically clean test rigs for testing of oxygen, breathing air and medical gas applications
  • 6 portable tests rigs for various air and liquid testing applications

Perth:

  • NATA traceable digital pressure transducers to perform periodic calibration process
  • Telescopic gauges
  • Digital verniers and micrometers
  • Bore gauges
  • Depth micrometers
  • Dial indicators
  • Special gauges
  • IRHD micro hardness testing for rubber components
  • Clean rooms to AS/NZ 14644.1 Class 7 for specialized testing
  • Pneumatic testing to 415 bar
  • Hydrostatic testing to 1,000 bar (or higher where required)
  • Breathing air analysis
  • Proof / failure testing
  • Non-Volatile Residue (NVR) testing
  • Test rigs to 40MPa for testing of industrial / working air, hydraulic oil and water applications
  • Test rigs to 40 MPa for testing of oxygen, breathing air and medical gas applications
  • Portable tests rigs for various air and liquid testing applications